NEW! Omni Metalcraft Lineshaft 90 Deg. Slave Curve 2-1/2"-1-11/16" Dia. 18"BF!!

Description

NEW! Omni Metalcraft Lineshaft 90 Deg. Slave Curve LSSC1.9X16-18-3-90-T - 2-1/2"-1-11/16" Dia. - 18"BF!!
SHIPPING IS IN THE LOWER 48 STATES-SHIPS TRUCK
Usually ships in 5 to 8 days
Omni Metalcraft Lineshaft 90 Deg. Slave Curve LSSC1.9X16-18-3-90-T - 2-1/2"-1-11/16" Dia. - 18"BF
Lineshaft Driven Live Roller Conveyors are a unique concept in powered conveyors. The basic design employs rollers which are independently driven by a urethane belt from a common drive shaft. The general operation of the conveyor is a driveshaft that runs the full length of the conveyor and transmits power to the rollers via a drive spool and belt. When back pressure is applied to the conveyed product, the spools driving the rollers under the product will slip on the driveshaft allowing the product to accumulate with a minimum amount of back pressure.
Lineshaft Conveyors are an optimum solution for conveyance of light (up to 15 lbs/roller) loads, at speeds of 25-120 FPM. They are designed for flat-bottomed, evenly distributed loads, such as those found in distribution and warehousing, food packaging and parcel handling. Clean, dry, oil free environments are the ideal conditions to maximize Lineshaft performance.
Features:
90 Degree Curve
18" Between Frame
2-1/2" dia. to 1-11/16" Zinc Plated Tapered Rollers on 3" centers
(2) Supports for 36" Top of Roller
Note: This item is a Slaved unit. It must be coupled to a Drive section, sold separately, in order to power the unit. Please also note that the Slaved and Driven sections will only couple to other Omni Metalcraft Lineshaft Conveyors.
The maximum run lengths a single Drive section can drive:
½ HP Motor – 40’
¾ HP Motor – 60’
1 HP Motor – 80’
T9CB2196161
Product Specifications
WIDTH INCHES
21
HEIGHT INCHES
36
CAPACITY LBS
Maximum 60 per Item Being Conveyed
ASSEMBLY
Assembled
AXLE CENTER INCHES
3
BETWEEN FRAME WIDTH INCHES
18
BRAND
Omni Metalcraft
CONSTRUCTION
Galvanized Steel
CONVEYOR SECTION
90 Degree Curve
LEG SETS PER UNIT
2
MANUFACTURERS PART NUMBER
LSSC1.9X16-18-3-90-T
PACKAGE QUANTITY
1
ROLLER DIAMETER INCHES
2-1/2 - 1-11/16 (Tapered)
STYLE
Drive
TYPE
Lineshaft Conveyor
WEIGHT LBS
264