-40%

Cyclo Ultraweld Headliner Adhesive - Aerosol Spray Can 14.25oz (1 Each)

$ 10.53

Availability: 30 in stock
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • MPN: C904
  • Brand: Cyclo
  • Type:: Headliner Adhesive & Carpet Adhesive
  • Condition: New
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: United States

    Description

    Cyclo Ultraweld Headliner and Carpet Adhesive
    REPAIR VEHICLE INTERIORS: Ulraweld is a high-strength spray adhesive to repair your interior parts that have become detached or loosened. Cyclo Headliner Adhesive is resistant to extreme weather conditions, water-resistant, and dries clear for neat appearance.
    HIGH TEMPERATURE: Ultraweld high temperature formula maintains a high bond strength at temperatures up to 170 degrees F (77 degrees C).
    AUTO HEAVY DUTY APPLICATIONS: Ideal for headliners, carpets, trunk linings, and inside door panels.
    MARINE APPLICATIONS: Cyclo Ultraweld Headliner and Carpet Adhesive excels for attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board.
    AEROSOL SPRAY CAN: 14.25oz.
    Cyclo Ultraweld Headliner and Carpet Adhesive provides the strongest bond for your vehicle headliner and carpet.
    The superior moisture, temperature, and water resistance allows for the longest lasting bond possible.
    Non-staining formula - Non-chlorinated
    The 3-way adjustable sprayer bonds carpet and foam to:
    Metal
    Fabric
    Leather
    Plastic
    Wood
    Paper
    FAST AND EASY DIRECTIONS
    Start with clean, dry, and free of contaminates, such as wax, oil, grease, surface
    Use masking tape to protect surrounding areas
    Shake well before use.
    Turn nozzle to desired pattern. Low, medium, or high.
    Hold can 6-8 inches from work surface and apply 2-3 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds, apply adhesive to both surfaces.
    Allow adhesive to dry for 5 minutes or until tacky.
    Press surfaces together using firm, uniform pressure eliminating air pockets. Bonds must be done within 15 minutes of spraying. Full cure is achieved in 24 hours at 70 degrees F
    To clean nozzle, invert can and spray until no adhesive appears.
    SHIPPING REGULATIONS:
    Due to DOT regulations, this product may not be shipped by air and is restricted to UPS Ground within the 48 contiguous United States.